ACTE UK > Products > Antennas > Cellular Antennas


Cellular GSM / GPRS / 2G / 3G / 4G Antennas

A selection of the 'GSM' antennas organised by their mounting type (application). Alternative coaxial cable lengths and connectors to those specified in datasheets may be available. Please contact us for further information.

For a list of the general frequencies in use by 2G, 3G & 4G networks see the antenna introduction page

 

'GSM' antennas for embedded design applications

Mini-GSM
Dual Band 900 / 1800MHz internal 1/4 wave element. Ground-plane dependent design. Just 43 x 6mm suitable for space constrained portable applications. Ground plane design requirements should be observed.
 
 
Neris
Tri-Band 900 / 1800 / 1900MHz internal 1/2 wave element. Ground-plane independent design means positioning is far less critical and the antenna is suitable for most fixed and mobile applications.
 
 
 
2JMAS01
Quad-Band GSM & 3G - 2100MHz + 2.4GHz Wifi / Bluetooth. 42 x 16mm suitable for space constrained portable applications. 100mm coaxial cable with U.FL connector.
 
 
 
2JMAS01A
Quad-Band GSM & 3G - 2100MHz + 2.4GHz Wifi / Bluetooth. 42 x 16mm suitable for space constrained portable applications. Designed for solder-down onto PCB applications.
 
 
 
AMMA-P003
Quad-Band GSM & 3G - 2100MHz PIFA (Planar Inverted-F Antenna). 24 x 5.5 x 4.4mm suitable for PCB mounting. Ground plane dependent design requires specific design observations for best performance.
 
 
 
2J425
Quad-Band GSM & 3G - 2100MHz + GPS receiver combination. 62 x 26 x 8.6mm great for space constrained portable applications. Optional GLONASS support (2J425GPCB) and WiFi (2J426). 250mm coaxial cable feeds with separate connectors.
 
 
 

 

Direct equipment / case mounted 'GSM' antennas

TARGAN
Quad-Band GSM 'stubby' antenna. 1/4-wave element for ground-plane independent design. Measures 8 x 54mm plus connector. Straight and right-angle versions with SMA or FME (female) connectors.
 
 
 
PTR2700
GSM 2G, 3G & 4G / LTE Multi-position for fixed & mobile applications. Ground-plane independent 1/2 Wave design. Max length 171mm. SMA-Male connector, locks in three positions.
 
 
 

 

Glass, Wall & Magnetic mount GSM antennas

AG360 & AG360 WB
Quad-Band 2G & 3G flexible T-Bar design suitable for a variety of mounting applications. 131mm long. AG360-WB is supplied with wall bracket kit and double-sided adhesive pad for glass mounting.
2J520
Quad-Band GSM, 3G & 4G / LTE with Wifi / Bluetooth. Flexible 'T'-bar design 119mm long. Supplied with double-sided adhesive tape. Other colours and connectors available.
 
 
 
2J4400P
Quad-Band GSM & 3G - 2100MHz + GPS. Glass mount, length: 161mm. 300mm coaxial cables with separate terminated leads.
 
 
 
 
2J680M
Quad-Band GSM, 3G & 4G LTE Multi-mount. Compact design suitable for mounting on any flat surface - metal, glass or ABS using internal magnet, screws holes or adhesive patch. Supplied with 3 meters coaxial cable & connector as required.
 
 
 
2J301M
Quad-Band GSM & 3G (2100MHz) Magnetic Mount antenna. Compact design with good performance when mounted on suitable metal ground plane. Standard versions also available with 3meters coaxial cable & SMA connector.
 
 
 
2J320
Tri-Band GSM & 3G (2100MHz) Magnetic Mount antenna. 5dBi Max gain. 308mm high, detachable whip design. Higher gain for marginal areas, achieved when mount onto suitable metal ground plane.
 
 
AM103-2
GSM, 3G & 4G Magnetic Mount. Large 45mm base for added stability with 310mm high 'whip'. Extra gain for fringe area reception. Also available with SMA connector.
 
 
 

 

External Wall and Pole Mount GSM antennas

AO100
Quad-Band GSM & 3G (2100MHz) Wall mount, supplied with attached bracket. 2dBi Gain for improved performance. 380mm high. Standard versions available with 3 meters coaxial cable & SMA connector.
 
 
 
AO100/4G
Wide-Band GSM, 3G & 4G (LTE) co-linear antenna with new internal elements to provide world-wide 4G support. Wall mounted, supplied with attached bracket. 2dBi Gain, 380mm high. Standard versions available with 3 meters coaxial cable & SMA connector.
 
 

Datasheet_LNK.png

 
FGO
2G / 3G / 4G High gain omni-directional for pole mount. High performance antenna with 4-5dBi gain for demanding applications. N-type (female) connector allows cable to be specifically selected for application. Bracket supplied, pole clamps & Coaxial cables available to suit. Height: 354mm excluding bracket
 
 
 
LMO7270
2G / 3G / 4G High gain MIMO antenna. Single housing with dual-antenna elements (polarised) for devices requiring Main and Diversity connections. High performance, omni-directional for demanding wall or pole mount applications. Standard SMA (male) connectors. Only 187mm high excluding optional bracket.
 
 
 
LPM8270
2G / 3G / 4G High gain MIMO Directional antenna. High performance flat-panel antenna for applications requiring a dual element (Main & Diversity) polarised solution. 8-9dBi gain. Twin N-type (female) connector allows cable to be specifically selected for application. 200mm square x 40mm excluding supplied bracket for wall or pole mounting.