novacomm_logo_web.jpg


Bluetooth Modules and Devices
 
Novacomm provide a range of Classic, Low-Energy and Dual-mode Bluetooth devices for embedded design into industrial applications.
 

Using Novacomm embedded modules in your design is both straight forward, fast and cost effective by way of the module offering a complete Bluetooth stack with profiles and services and with both RF and Bluetooth certification.

 

Products and Documentation

 

Bluetooth Classic Modules

MDCS42A
Classic Bluetooth (2.1+EDR) Module with +4dBm (Class 2) output. On-board PCB track antenna for reduced size and cost. Complete Bluetooth stack and multiple profiles. UART & USB interface + PCM digital audio i/f. 3.3v Supply.
 
 

Datasheet_LNK.png

 
MDCS45A
Classic Bluetooth (2.1+EDR) Module with +17dBm (Class 1) output. On-board PCB track antenna for reduced size and cost. Complete Bluetooth stack and multiple profiles. UART & USB interface + PCM digital audio i/f. 3.3v Supply.
 
 

Datasheet_LNK.png

 
MDCS52
Classic Bluetooth (2.1+EDR) Module with Class 2 power output and external antenna. Complete Bluetooth stack and multiple profiles including A2DP & AVRCP. On board CODEC and analog audio interfacing. UART interface, 3.3v Supply.
 
 

Datasheet_LNK.png

 
MDCS56
Classic Bluetooth (2.1+EDR) Module with Class 2 power output and external antenna. Complete Bluetooth stack and multiple profiles including A2DP & AVRCP. PCM digital audio interfac and support for Apple iAP, UART / I2C interface, 3.3v Supply.
 
 

Datasheet_LNK.png

 


Bluetooth Smart / Low Energy and Dual Mode Modules

MDCS71
Bluetooth Low Energy (BT 4.0) module with +4dBM power & on-board chip antenna. Complete Bluetooth LE stack and multiple GATT based profiles. UART / I2C / SPI interfacing with additional I/O. 1.8 to 3.6v Supply.
 
 

Datasheet_LNK.png

 
MDCS72A/B
Bluetooth Low Energy (BT 4.0) module with +4dBM power. On-board chip antenna or external antenna connector. Complete Bluetooth LE stack and multiple GATT based profiles. UART, SPI and USB or I2C master interface + additional I/O including 12-bit ADC. 2.0 to 3.6v Supply.
 
 

Datasheet_LNK.png

 
MDCS86
Bluetooth Smart Ready / Dual-Mode module with +7dBM power & on-board chip or external antenna. Support for SPDIF & PCM audio interfaces and A2DP + AVRCP profiles. UART & USB interfacing with additional I/O including capacitive touch sensors. 3.3v Supply.
 
 

Datasheet_LNK.png

 
 
Development and support tools
 
 
NCCI - Command interface
The NovaComm Control Interface (NCCI) describes the management and control method for each the embedded Bluetooth modules. This document is applicable to all devices.
 
 

Datasheet_LNK.png

 
EVK002 Bluetooth Evaluation Kit
A comprehensive evaluation board which supports the Novacomm evaluation modules available separately for each Novacomm Bluetooth device. Interface via RS232 DB-25 Pin and USB 2.0. Firmware and parameter upgrading is possible via SPI. Switches for I/O or UART and I/O or Led/USB/UART DTE/DCE selection.
 

Datasheet_LNK.png

 
Novacomm Bluetooth Evaluation Modules
Each evaluation is based on a standard Novacomm Bluetooth module mounted on a base board to fit onto the Novacomm Bluetooth Evaluation Kit. Contact ACTE for pricing and availability for the version required.